金刚石涂层微铣刀的铣削加工试验

为了掌握金刚石涂层对其铣削性能的影响，针对直径为50 μm级的硬质合金微铣刀，进行了金刚石涂层与未涂层硬质合金微铣刀具微槽铣削试验。通过使用线电极电火花磨削技术制备出直径为50 μm级的D形微铣刀,采用金刚石涂层和未涂层刀具在纯铜工件上开展微槽铣削工艺试验；使用白光干涉仪、超景深显微镜等仪器来观测微槽表面形貌、粗糙度等随铣削距离变化的规律，分析金刚石涂层对硬质合金微铣刀铣削加工质量的影响。结果表明：采用金刚石涂层刀具加工的微槽具有较少的毛刺，表面粗糙度值约为未涂层刀具铣削的粗糙度值的1/2，并且能够在一定距离内保持稳定的槽宽、粗糙度值和侧面形貌。     

铝碳质长水口用低铝抗氧化涂层的研制

为抑制铝碳质长水口使用过程中石墨的氧化，其表面会涂覆含 20%~30%Al₂O₃的抗氧化涂层，但切割丝钢等特种钢冶炼过程必须严格控制钢液中夹杂的 Al₂O₃的含量，因此需要制备低氧化铝含量的抗氧化涂层。本文通过调节涂料组成、加水量和水玻璃加入量制备了低铝抗氧化涂层，并利用扫描电镜分析了抗氧化实验后试样断口的显微结构。结果表明：以粘土粉、钾长石粉和硅砂为主要原料，添加 10%硼砂的涂料可在 800 ℃形成良好的釉层，此时涂料中 A12O3的含量可降至 12%，得到了低铝涂料；当加入占涂料质量 80%的水和 40%的水玻璃时，涂层具有最佳的涂覆性能和抗氧化性能，涂层和长水口基体结合致密，保护了长水口中的石墨不被氧化。     

基于随机模型的动车组制动模块稳健优化设计

针对目前产品优化设计中未考虑设计变量随机性和灵敏度指数对产品质量特性的影响及优化求解效率低等问题，提出一种综合考虑灵敏度指数与质量损失函数的稳健优化设计方法。通过假设设计变量的分布类型，得到设计变量的概率分布特征，将设计变量对产品质量特性的灵敏度指数与质量损失函数加权整合，并以此作为优化目标，以设计变量的容差作为约束条件，构建随机稳健优化模型。通过扩大种群数目、改进控制参数及增加惩罚因子的方法对遗传算法进行改进，结合改进的遗传算法对优化模型进行求解，得到优化模型的全局稳健最优解。以某动车组制动模块为例，采用给出的方法对其进行稳健优化设计，验证该方法的有效性与合理性。优化结果表明，该方法能够实现动车组制动模块的稳健优化设计，提高了制动模块的抗干扰能力。     

气候环境实验室地面结冰云雾模拟控制系统设计

飞机结冰会引起飞机气动特性、动力系统性能改变,甚至造成飞行事故。地面结冰云雾模拟设施作为一种模拟飞机飞行结冰条件的重要设备,常用于飞机防除冰系统功能验证。针对气候环境实验室结冰云雾试验条件需要,在对地面结冰云雾模拟系统进行研究的基础上,对适用于气候环境实验室的结冰云雾模拟系统进行了设计。对系统关键设计技术、系统功能及组成进行了分析,并对控制系统方案进行了详细阐述。试验表明,控制系统人机界面友好,运行可靠,能够满足液态水含量、雾滴直径参数的精确调节,产生符合试验所需的结冰环境。     

Improvement of Stochastic Competitive Learning for Social Network

As an unsupervised learning method, stochastic competitive learning is commonly used for community detection in social network analysis. Compared with the traditional community detection algorithms, it has the advantage of realizing the timeseries community detection by simulating the community formation process. In order to improve the accuracy and solve the problem that several parameters in stochastic competitive learning need to be pre-set, the author improves the algorithms and realizes improved stochastic competitive learning by particle position initialization, parameter optimization and particle domination ability self-adaptive. The experiment result shows that each improved method improves the accuracy of the algorithm, and the F1 score of the improved algorithm is 9.07% higher than that of original algorithm.     

基于密度聚类与SVM的非法广播信号识别研究

针对非法广播信号的危害,以及传统人工检测效率低的问题,提出一种基于密度聚类与SVM的信号识别模型。首先,采用标准欧式距离对特征信号进行提取;其次,以聚类样本为基础,采用SVM分类器对信号分类;最后,以青海广播电视局中波台整点时刻前后300帧的数据为样本,以静音信号作为评价指标,对信号进行识别。结果表明,在正常信号中加入非法信号后,频谱中有少量的静音信号,且SVM训练时间和识别正确率都要优于传统算法。     

The potential of energy flexibility of space heating and cooling in Portugal

This study assesses the potential of energy flexibility of space heating and cooling for a typical household under different geographical conditions in Portugal. The proposed approach modifies the demand through the optimization of the thermostat settings using a genetic algorithm to reduce either operational costs or interaction with the grid. The results show that the used energy flexibility indicator expresses the available potential and that flexibility depends on several factors, namely: i) thermal inertia of the archetypical household; ii) the time of use electricity tariffs; iii) users’ comfort boundaries; and iv) the geographical location of the houses.     

基于改进NSGA-Ⅱ算法的乙烯裂解炉操作优化

现有的乙烯裂解炉优化通常只针对两个目标函数即产物乙烯和丙烯的收率，并且采用遗传算法的收敛效果一般，故提出一种基于改进NSGA-Ⅱ算法来研究一个多目标运行的解决方案，以此来解决乙烯裂解炉的固定周期操作优化问题，即在增大产物乙烯和丙烯收率的同时减少原料以及蒸汽流量来提高整体运行状况。把具体问题量化为数学模型，分析了原料气烃比、原料流量、出口温度对乙烯和丙烯收率的影响。实验结果表明，相较于原有操作条件，提出的优化方案具有良好的可行性。     

Multi-objective optimization for efficient modeling and improvement of the high temperature PEM fuel cell based Micro-CHP system

Fuel cells due to different useful features such as high efficiency, low pollution, noiselessness, lack of moving parts, variety of fuels used and wide range of capacity of these sources can be the main reasons for their tendency to use them in different applications. In this study, the application of a high temperature proton exchange membrane fuel cell (HT-PEMFC) in a combined heat and power (CHP) plant has been analyzed. This study presents a multi-objective optimization method to provide an optimal design parameters for the HT-PEMFC based micro-CHP during a 14,000 h lifetime by considering the effect of degradation. The purpose is to optimize the net electrical efficiency and the electrical power generation. For the optimization process, different design parameters including auxiliary to process fuel ratio, anodic stoichiometric ratio, steam to carbon ratio, and fuel partialization level have been employed. For optimization, A new technique based on Tent mapping and Lévy flight mechanism, called improved collective animal behavior (ICAB) algorithm has been employed to solve the algorithm premature convergence shortcoming. Experimental results of the proposed method has been applied to the data of a practical plant (Sidera30) for analyzing the efficiency of the proposed ICAB based system, it is compared with normal condition and another genetic algorithm based method for this purpose. Final results showed that the difference between the maximum electrical power production under normal condition and ICAB based condition changes from 2.5 kW when it starts and reaches to its maximum value, 3.0 kW, after 14,000 h lifetime. It is also concluded that the cumulative average for the normal and the ICAB based algorithm are 24.01 kW and 27.04 kW, respectively which showed about 3.03 kW cumulative differences.     

退火温度对0Cr25Al5热轧态盘条钢组织及性能的影响

采用显微组织分析和分子动力学模拟等方法研究了退火温度对0Cr25Al5热轧态盘条钢组织及性能的影响。结果发现,晶粒尺寸随温度的升高逐渐增加并趋于稳定,但是断后伸长率和断面收缩率在950 ℃突然大幅度下降。试样组织形貌在800 ℃和950 ℃退火温度下的OM及SEM分析结果未见明显差别。于是使用分子动力学模拟对0Cr25Al5钢三元体系的自由能进行了计算,发现随着B2结构的FeAl或者DO3结构的Fe₃Al有序相尺寸的增大,系统自由能先减小后增大,其最小值随着退火温度的升高向有序相颗粒尺寸减小的方向移动。在1273 K的高温下仍然会保留60 nm左右大小的有序相颗粒。因此,推测0Cr25Al5钢在大于950 ℃的温度范围内韧性下降是由于60 nm左右的B2结构的FeAl或者DO3结构的Fe₃Al有序相造成,与晶粒尺寸无关。因此,针对该钢种应进行低温退火促使基体组织回复以消除缺陷,从而抑制Fe、Al等基体原子的扩散。